Time stopper

1. Download and install RegCure.

2. Open the application. You will need to left-click on the application icon to open this program and use it.

3. Select the desired settings. Left-click on the “Settings” tab, and select the desired settings.

4. Scan your PC for problems. On the command bar (left side) left-click on “Scan”; this will scan all of the files on your computer for problems. Scanning may take a few moments so be patient.

5. After the scan has been run, fix the problems. Upon concluding the scan, RegCure will notify of you any problems. All you have to do is check-mark the problems that you wish to be fixed and left-click on “Fix Problems."

1. Purchase RegCure from the official website. A license cannot be obtained without actually purchasing the software. When you purchase the software, it will automatically download the program once the purchase is complete. You will also receive an email containing the registration key.

2. Install the software. Follow the prompts until you reach where you need to type the registration key (which will open the full version of RegCure). Without the registration key, you will only be able to use the demo version, which does not have all the features.

3. Open the email you received from the RegCure purchase; this email message contains the registration key.

4. Type the registration key into the installation wizard. Once this has been completed, follow the prompts to complete the setup. The full version of RegCure will now be installed, and you also have a license for the product.

1. Purchase the full version of RegCure. Click "Buy Now." A registration key will be emailed to you once the purchase is complete.

2. Download the software (it will do so once the the purchase has finished). Launch the installation wizard by opening the download icon.

3. Agree to the license agreement, then follow the prompts until you reach the registration key.

4. Log onto your email account and open the email you received from RegCure that contains the registration key.

5. Type the key into the installation wizard and follow the remaining steps to complete installation. The full version of RegCure will be installed onto the computer and you will now have your fixed license for the product.

1. Locate the file or folder you want to move.

2. Open the destination folder or disk.

3. Drag the file or folder to the destination.

4. You can also cut and paste to move a file: select the file, and then choose Cut from the Edit menu or press Ctrl+C (Windows) or Command+C (Macintosh). Then select the destination and either choose Paste from the Edit menu or press Ctrl+V (Windows) or Command+V (Mac).

1. Click on "Start" in the lower left-hand portion of the desktop screen.

2. Select "My Computer" and in the window that appears, pick the drive icon where the source file resides.

3. Navigate to the folder that contains the source file and find the file in the list of files that reside in the folder.

4. Move the mouse cursor over the file icon and perform a right mouse click. Select "Cut" from the menu that has appeared, then click the down arrow on the right side of the address list box near the top of the form.

5. Choose the desired drive from the list in the drop down box and navigate to the folder that will become the destination folder for the file. Move the mouse cursor over the folder icon and perform a right mouse click.

6. Pick "Paste" from the list that has appeared in the drop down menu and click the left mouse button.

7. Wait while the system moves the file from the old folder to the new folder.

1. Place the mouse cursor in the Explorer window over the file you wish to move and left click to select it.

2. Hold the left mouse button down over the file to be moved. Move the mouse cursor over the directory you wish to move the file to, hold the "Shift" key down and release the left mouse button. The file will now be moved to the new location. You can now release the "Shift" key. This method is called "dragging and dropping."

3. Bring up the Edit menu by left clicking on the Edit option in the Explorer Window. Select the Move to Folder command from the Edit menu and a directory window will pop up. Select the directory you wish to move the file to and select the move button. The selected file will now be copied.

4. Move the mouse cursor, with the right mouse button down, to the directory you wish to move the file to. Release the right mouse button and a context menu will pop up. Click on the Move Here command with the left mouse button and the file will be moved.

5. Press the "Control" key down while pressing the "C" key. Select the directory you wish to move the file to and hold the "Control" key down while pressing the "V" key. This will copy the file. Now select the original file and press the "Delete" key to delete the original file. This will effectively move the file.

1. Sign in to Blogger

2. Go to the Template tab and select the Edit HTML link.

3. Find the beginning of the styles in the template. You'll see the opening style tag. (See arrow in image.) Place your cursor at the beginning of the first line AFTER the opening style tag.

4. Drag your cursor down the page until you reach the line right BEFORE the closing style tag to select all the styles. (See arrow in image for ending style tag.)

   Copy the highlighted material.

   Leave everything highlighted in the template. You'll need it again later.

5. Go to a basic text editor. You can also use HTML editing software such as Dreamweaver, but that isn't required. Paste the styles you copied into a new document.

6. Save the document with a name such as mystyles.css or blogstyles.css. Save it in the root folder of the web site where you plan to upload it.

1. Open your FTP (File Transfer Protocol) application and connect to your web server.

2. Upload the mystyles.css file to your server.

3. In a browser, find the stylesheet and display it in the browser. Copy the entire URL, including the http. Since the stylesheet is not on Blogger, you'll need the complete URL to link it to your blog. The URL should be something like http://www.mysite.com/mystyles.css.

4. Go back to the template on Blogger. If the styles are not still highlighted, select them again. Delete them.

   Also delete the opening and closing style tags. Leave your cursor in the spot where they were.

5. In the place where the deleted styles used to be, write a link to the new stylesheet on your external server. See the image at the very top of the article to see how to write the link. Of course, the URL should be customized for your server.

6. Click Save Template Changes. Use Preview to make sure the new link to the external stylesheet is working properly. When you're sure everything is working right, republish your entire blog.

1. Open ReCycle. Load a "WAV" or "AIFF" file of the song you want to analyze into the file browser window. ReCycle will ask if you want to move the locator to the first slice point. Click "Yes." ReCycle will also warn you that you won't be able to hear any effects yet. Click "OK."

2. Select a loop of two to four bars with some sort of rhythmic element like a drum or keyboard beat. Place the start and end markers on the exact measure of the song (bar length) using the "L" and "R" handles at the bottom of the graphical display.

3. Type in the number of bars you cut out into the "Bars" field at the top of the display and press "Enter."

4. Find out the approximate BPM of the loop based on the cut you loaded. ReCycle automatically computes the BPM based on the length of the file in bars and beats to give you the exact tempo.

1. Write a simple redirector program. By using a redirector program you are "telling" some of the server items to move around, which allows the load to become more balanced. A simple redirector program like the following one can be used in Perl. Redirector program:
   #!/usr/bin/perl
   $|=1;
   while () {
   @X = split;
   $url = $X[0];
   if ($url !~ /^http:\/\/www\.hostname\.com/) {
   $_ = $url;
   s/^http:\/\/(.*)\/(.*)/http:\/\/www.hostname.com\/\2/;
   print "301:$_\n";
   } else {
   print "$url\n";
   }
   }

2. Change the redirector_program variable. This variable may be commented out, so look in your squid.conf file to find it. Specify where this file is, for example: /usr/sbin/redirect.pl. You can decide where the file is going to live, name it something easy to remember and find in case you need to make changes at a later date.

3. Check settings for redirection. Make sure the httpd_accel_uses_host_header variable is turned on or the redirection will not happen. Once the redirection is written, the program variable is changed to have to tell it to put the redirection into action. If you find there is trouble turning the redirection on, check the programming code to make sure you didn't forget any commands. Even something as small as a "/" can throw the entire program off.

4. Troubleshoot and back track if the redirection appears to not be working or to be working improperly. Look over the programming you wrote to make sure everything is telling the system exactly what you want it to say.

1. Launch the Limewire application. If you don't have Limewire installed, you can download it for free from the official Limewire website (see link in the Resources section).

2. Enter your Jabber-based web login credentials in the right-hand side of the Limewire screen. After logging in, all of your online friends will appear in the side window.

3. Go to your second computer and repeat Step 1 and Step 2 (if moving files between two of your own computers). When repeating Step 2, add yourself to your own buddy list. If attempting to move files between your computer and a computer owned by a third party, have the other individual follow Step 1 and Step 2. You will then see each other in the right-hand window listed in the "Friends" list.

4. Click the "Share" button next to the name of the individual or computer to which you want to move files. The Limewire application's default settings only share files in your Limewire folder. In the Share window, specify specific files or folders that you want to move to that individual. The list of available files will then appear in a separate window on the second computer.

5. Double-click each file that you want to download to the second computer. If moving files to a friend or family member, instruct her to double-click each of the files that you have specifically shared with her account. Limewire will initiate the download process, moving the files from the first computer to the second computer.

1. Plug the removable memory card into a USB port in the PC.

2. Wait a moment for the PC to recognize the memory card, then click the "Start" button in the lower left-hand corner of the computer screen.

3. Click the "My Computer" icon.

4. Double-click on the icon for your removable hard drive. It may have a name such as "My Removable Hard Drive" or it may be named with a letter, such as "Removable Disk J" or "Removable Disk K."

5. Go to the folder on your computer that holds the files you want to move to the card.

6. Click and drag the files you want moved over to the removable memory card folder.

7. Release the mouse when the file is on top of the removable hard drive folder.

8. Click the X on the upper right-hand corner of the removable hard drive folder to close it.

9. Click the "Start" button.

10. Click the "My Computer" icon.

11. Right-click on the removable hard drive icon and select "Eject."

12. Wait a few seconds for your computer to eject the removable hard drive.

13. Remove the removable hard drive from your computer.

Significance

The computer mouse is significant because it minimizes the need to memorize keyboard control commands to open and access folders and files on the computer. Simply moving the mouse around on a flat surface enables the user to move the screen cursor around in real time as well as select and click on items on the screen.

Features

Most computer mice are designed ergonomically so that the user's hand fits comfortably on and around the shape of the mouse. Many computer mice feature two clickable buttons or surfaces, traditionally known as "right click" and "left click."

Some PC mice also include a built-in scroll wheel between the two buttons or a clickable button that doubles as a scrolling mechanism. Still other computer mice include additional side buttons with a large rolling ball on top for scrolling purposes rather than moving the mouse itself around the desk surface.

Effects

The PC mouse is designed to operate on a virtual X-Y axis plane. This location and position of the mouse on the X-Y plane is mapped and transmitted constantly to the computer which maps out the matching location on the screen. X and Y stand for horizontal and vertical respectively.

Essentially the flat surface of the desk is the mouse's X-Y plane and the computer screen is the X-Y plane that displays the cursor location matching the mouse location. Computer mice use a physical track ball on the underside of the mouse to track location and some mice use an optical light beam to track location.

Clicking on the buttons on the mouse activate a command on the computer screen. For example if the user hovers the mouse cursor on screen over a file folder and left clicks twice on the folder, the folder will open on screen.

Solution

One key problem with optical based mice that use an optical light to reflect onto the flat surface to detect location is that certain surfaces can distort the reflection making the cursor jump around or fail to move. A solution to this problem is to place the mouse on a non-shiny flat surface or affix a plain white piece of paper to the flat surface and place the mouse on top of it.

A problem with older trackball mice is that debris and dust can become stuck inside the mouse. This is resolved by removing the trackball and gently blowing into the compartment to clear dust and debris.

Connection Types

Computer mice connect to a PC in a number of ways. These connections include USB connections, PS/2 port connections and serial port connections.

USB mice connect via a USB cable connected to a USB port on the computer. Some USB mice connect wirelessly to the computer. This is accomplished with a wireless receiver connected to a USB port. The mouse is powered by removable batteries inside the mouse.

PS/2 port connections are round pin-based jacks on the computer to which some keyboards and mice can connect. PS/2 connective mice have a round plug on the end that is filled with gold pin connectors.

Serial ports are the oldest of the connection types and are typically rectangular in shape. Some printers, keyboards, monitors and mice connect by serial port. The plug on the mouse contains long gold connector pins and may also house screws that "bolt" the connection securely to the computer's serial port.

Significance

Electronic patient records are easier to transfer from one system to another, and easier to understand as it eliminates the bad handwriting scenario. EPR also increases the patient safety as the patient identification is always on hand.

Efficiency

Electronic patient record increases the efficiency of the hospital, clinic, doctors, medical related personnel, and ultimately to the patient, by reducing the cost and extending more time for health care.

Insight

The U.S. government is encouraging the health industry to move patient records from physical files to electronic files.

Fact

According to Robert Golden, some industry watchers estimate some 60 percent of the health care institution is investigating the electronic patient record system.

STARS

STARS stands for Stony Brook Totally Automated Record System and is a mobile equipment that can be wheeled to nurses' station, in the hallway or alongside the patient's bed. This system for electronic patient record strengthens the confidence for patient and the family, leading to greater treatment compliance and better outcomes.